For BMW EWS2 EWS3.2 Emulator Generic

Product Instructions:
1. Remove the original EWS2 control unit, find +12v ACC, GND, and K-line wires, and attach the emulator. Emulator must be in service mode: JUMPER 1shorted.
2. Connect ANY K-line diagnostic adapter to the vehicle diagnostic connector and launch emulator C3. Choose COM port, write in desired ISN number, and press the button Store. Or -
4. For some ECU s it is possible to read the ISN numbers directly from the engine control unit. In this case select option"ECU xxxxx", pressRead. The software will try to read ISN. If successful, choose option "EWS emulator" and press the button store to save the ISN number into the emulator.
5. Disconnect the emulator from K-line, remove JUMPER 1 and connect the K output from the emulator to
DME(DDE) <-> EWS line.
6. Don't forget to short two starter relay wires (EWS connector)!
7. Car is ready to start.

In the case of EWS3.2 similar procedure is used, the only difference is that it is NOT connected directly to the diagnostic K-line.
There are NO counters or car starts limited. You can change and store new ISN without any limitations.
The emulator is shipped with jumper 1shorted. For testing purposes, ISN 0579 is stored by default.

Package Included:
1 * Emulator

Shipping&Warranty:
Free Shipping
Shipping Time: 3-12 Business Days
24-Hour Online Service: Solve your product problems and any other issues